Personalized Merry Christmas 42" x 84" Magnetic Garage Banner For Steel Garage Doors Customizable
Wish your neighbors Merry Christmas and Happy Holidays with our very large, 42" x 84" magnetic banner. We'll replace the family photo and name shown in the pictures with your own personal family photo and name.
This banner is designed to fit in two sections on most standard steel sectional garage doors. Because it is magnetic it stays put when you open and close the garage door. This magnet comes in two sections, each one is 21" tall.
Please NOTE the following BEFORE purchasing.
- This is for steel doors only. Check your door with a magnet. If the magnet sticks your door is steel. If not it is probably aluminum or wood.
- Your sections need to be 21" tall, which is the standard size for most doors.
- This banner requires some extra information from you. Please read the "Personalization instructions" before placing your order.
Unlike other garage door banners, no other parts have to be purchased. Simply unroll, line it up with the section, and smooth it out. Surface should be clean before attaching. Attaching this garage door banner goes a lot easier with two people.
The images show the (banner) attached to the most common garage door sizes; 8 feet and 16 feet by 7 feet high.
Printed with UV inks, these banners resist fading.
In the comments box let us know the last name of your family.
Make sure to upload the family photo you would like to use on the banner. To do this use the "file upload button" on the product page. The higher the resolution of the image, the better the finished product.
If you forget to complete steps we will send you an email requesting the information needed.
After placing your order we will email you a proof image of the design requesting approval to print. This will happen within 24 hours of your order placement. We cannot print the banner until approval is received.
Last but certainly not least, please let us know in the comments box if you have a deadline for receiving the banner.
Discounts are applied at checkout.
How to use our Garage Door Banners.
- The surface you put the magnet on needs to be clean. Typically you can just wipe it with a clean cloth.
- The magnet needs to be pliable when you put it up. If it has been in storage for awhile or it is cold, you may need to heat it in the sun (lay it flat) or in the house until it is pliable.
- With the larger sizes it helps to have two people to line it up. Magnets have a mind of their own.
- For storage, if you can lay it on a flat surface that is the best. But most of us need to roll and store. Roll it with the print face out. That helps when you go to put it up to make the curl go against the door and not away from it. Don't roll it tight. The looser you can roll it the better.
- Over time the magnet will conform to the contours of the door it is on. When you go to store it, lay it on a flat surface in the sun (on a warm day) and most of the contours will straighten out.